beam switch
英 [biːm swɪtʃ]
美 [biːm swɪtʃ]
网络 光束切换器
双语例句
- The low beam light switch is placed a little far away on the dash, which is annoying, but most other switches are within reach and work well.
近光灯开关设计得有点远，有点郁闷。但是大部分得开关都够得着，工作正常。 - The height adjusting of the balance beam is matched with a voice adjusting switch, so that the function of changing different games and teaching can be realized.
调节平衡木的高低与语音调节开关配合，便可实现多种游戏、教学变换的功能。 - While reading the low beam sense status, turn the headlamp switch off then back on.
当读近光感知状态时，将头灯开关转为关，然后恢复为开。 - These resonance-enhanced shifts of the transmitted light beam may lead to potential applications in the optical devices, such as optical switch and optical coupler.
共振增强的透射光束的位移在光开关及光耦合器中具有潜在的应用。 - Being the fact that PIN switch tends to handle higher power and beam lead PIN diode has bad thermo diffuse properties, a power substitution method is proposed to verify PIN switch designs.
鉴于PIN开关有承受更大的射频功率倾向和梁式引线PIN二极管散热较差的事实，本文提出了一种替代法进行功率验证。 - To realize the weak light all optical switch, a series of all optical switch designs, including X switch and intersection switch, are proposed based on coupling mode theory and beam propagation method.
依据耦合模理论与光束传播法（beampropagationmethod），提出了由X结波导到交叉波导的系列化全光开关设计。 - We test the height of silicon nitride suspended beam from different depositing condition in laser-scanning microscope and decide the most proper depositing condition for RF MEMS switch.
本文用共聚焦显微镜测试氮化硅薄膜悬梁悬起的高度，确定出最适合接触式射频MEMS开关中使用的氮化硅生长工艺条件。 - This paper introduces some key technologies applied in the project, including reinforced track beam, joint switch, experimental straddle bogie and other innovative methods of erecting beams, holds that the goal is to decease the total investment in monorail construction.
介绍了建设过程中自制预应力钢筋混凝土轨道粱、自制关节型道岔、试制跨座形转向架、创新架梁方法等概况，以及成功实现低造价的措施。 - By means of full-wave simulations ( HFSS) the effect of metal plate on the series capacitive RF MEMS switch is analyzed and the performance of the cantilever beam RF MEMS switch is simulated, which in theory verifies the result of practical measured results.
本文利用HFSS软件模拟分析了金属板对串联电容式开关性能的影响，也模拟分析了悬臂梁RFMEMS开关的性能，从理论上进行了分析并与测试结果进行了对比验证。 - Based on the post-buckling theory of large deflection beams, the nonlinear stiffness of a post-buckling beam is analyzed, then a novel micro-machined acceleration switch is designed.
根据弹性梁的大挠度后屈曲理论，建立了多力耦合作用下加速度开关系统的动力学模型，由此设计了一种新型屈曲式微机械加速度开关。 - The structure of the optical switch is optimized. The method presented can reduce the drive voltage of torsion beam switch.
优化设计了光开关结构，提出了一种降低扭臂式结构光开关驱动电压的方法。 - Theoretical analysis manifests that the yielding voltage is more sensitive to beam thickness than other design parameters do about the torsion-mirror switch structures.
理论分析表明，在关于该光开关结构的一系列设计参数中，拐点静电电压对于弹性扭转梁的厚度最敏感。 - A novel micromachining torsion beam optical switch micro-actuator driven by electrostatic force was designed and simulated by means of Finite Element Method ( FEM).
报导了一种新型静电驱动扭转梁大位移微机械光开关微动作器的模拟、设计和制作。 - By controlling the magnitude of the applied electric field, the readout beam can satisfy or deviate the Bragg condition, which makes the diffraction efficiency be 1 or 0, and thus realize the exchange or bypass operation of the switch.
通过控制读出光栅时外加电场的大小使读出光满足或偏离布拉格条件，从而控制衍射效率为1或0，实现开关的交换和直通操作。 - We believe that our results will be useful for the beam steering, all-optical switch and optical encoding.
我们所得到的这些结果对未来光束控制、全光开关及光学编码有很好的启发及帮助的作用。 - Making use of the magneto-optic crystal fiber, high-speed Faraday rotator and optic-fiber polarization beam splitter/ combiner, the all-fiber magneto-optic switch of magneto-optic crystal fiber is designed.
采用磁光晶体光纤、高速法拉第旋转器和光纤型偏振分/合束器等元器件设计了磁光晶体光纤型全光纤磁光开关。 - The magneto-optic switch made of magneto-optic material fiber and optic-fiber polarization beam splitter/ combiner is called all-fiber magneto-optic switch.
全光纤磁光开关是指其所采用的磁光材料和偏振分/合束器均制作成光纤形状的磁光开关。 - In this paper, we adopt fin line for transmission line, and use beam lead PIN diode to complete this switch by two means which are parallel means and series means, and then these tow switches are tested.
本论文以鳍线为传输线，利用梁式引线PIN管，分别采用并联和串联的方式实现了此开关，并进行了测试。 - Based on the propagation theory of laser beams, the change of beam parameters, focal switch and beam shaping of laser beams after passing through an astigmatic lens are analysed in the present thesis. 1.
本文以激光光束传输理论为基础，研究讨论了激光光束通过像散透镜聚焦后光束参数的改变，焦开关现象及光束整形等。 - According to the beam expansion rule, the structure of the TIR switch should be adjusted accordingly.
根据该展宽规律，全内反射型光开关的结构必须做出相应的调整。 - The fractional Fourier transform of the truncated elliptical Gaussian beam is investigated. The focal shift and focal switch of the truncated elliptical Gaussian beam are shown.
然后研究了受截取椭圆高斯光束的分数Fourier变换，分析了受截取椭圆高斯光束焦移和焦开关现象的物理成因。 - Due to the robustness of dark soliton stripes on the paraboloidal background, we believe that our results will be useful for the beam steering, all-optical switch, and optical encoding.
由于暗孤子条的稳定传输，相信我们结果未来可用于对光束的操控、全光开关及光学编码等方面。 - The beam direction of the phased array radar can switch quickly, which provides the phased array radar with high agility and the ability of accomplishing multi-functions such as search and tracking.
相控阵雷达波束具有快速捷变能力，这使相控阵雷达能够同时完成搜索和多目标跟踪等多种功能，具有极大的灵活性和自适应能力。